Hot DIP Galvanized Steel Grating for Building Wall Fence
Steel bar grating is a good choice for strength, safety, long-term cost and durability.
Bar Grating consists of a series of bearing bars, welded (or otherwise joined) at various intervals to
perpendicular cross bars to form a load-bearing panel. It is available in a wide selection of panel sizes.
1.Material:
Low Carbon Steel or Stainless Steel
2.Surface Treatment:
Untreated, Painting or Hot Dipped Galvanizing
3.Steel grating standards:
A. China: YB/T4001-1998
B. USA: ANSI/NAAMM (MBG 531-88)
C. UK: BS4592-1987
D. Australia: AS1657-1988
E: Japan: JIS
Specification
--Bearing Bar (Load Bar) Specifications (mm):
The specification of plain type and serrated type bearing bar is 20 x 3 to 100 x 10.
The specification of I-section type is 25 x 5 x 3, 32 x 5 x 3, 38 x 5 x 3, 40 x 5 x 3, 50 x 5 x 3, 50 x 7 x 4,
55 x 7 x 4, 60 x 7 x 4, 65 x 7 x 4, 70 x 7 x 4, 75 x 7 x 4, etc.
--Bearing Bar Pitch (center to center):
12.5, 15,25, 30, 30.16, 32.5, 34, 40, 41.25, 45, 50, 60, 60.32, 80, 100 mm etc, also be according to
client's requirement and 30, 40, 60mm are recommended,
America standard is available <1' x 3/16', 1 1/4' x 3/16', 1-1/2' x 3/16', 1' x 1/4', 1-1/4' x 1/4',
1 1/2' x 1/4'(19-w-4),(19-w-2) and so on.>
--Cross Bar Pitch (center to center):
38, 50, 76, 100, 101.6mm etc, also be according to client's requirement and 50, 100mm are
recommended, America standard is available.
Application
Steel grating regularly appears on catwalk, factory floor, platform, railing infill panel, stair tread, foot pedal,
drain cover, commercial and industrial flooring.
Stair treads are the horizontal sections of stairs that serve as the step surface of each step.
These treads are installed on the top of each step.
![Hot DIP Galvanized for Building Wall Fence Metal Steel Grating](//www.micstatic.com/athena/img/transparent.png)
Quality control process
![Hot DIP Galvanized for Building Wall Fence Metal Steel Grating](//www.micstatic.com/athena/img/transparent.png)